• Aneroid Sphygmomanometer with Calibrated Cuff and Certified Gauge
  • Comes with a large easy-to-read dial.
  • Comes with an adult size blue nylon cuff.

225 in stock

Why Choose Blood Pressure Cuff?

This Blood pressure cuff consists of a piece of rubber or similar material that is wrapped around a patient’s arm and then inflated in order to measure their blood pressure.

  • Comes with a large easy-to-read dial.
  • Comes with an adult size blue nylon cuff.
  • With proper care and maintenance, your blood pressure kit will provide years of satisfactory service. The basic rules:
  • Do not drop or jar.
  • Never inflate beyond 300mmHg.
  • Never expose the cuffs to intensive solar radiation!
  • Never touch the cuff fabric or parts with a sharp instrument, since this could cause damage!
  • Always deflate cuff completely before storage
  • Do not dismantle the manometer under any circumstance.
  • Store complete instrument in storage case provided to keep the chest piece and all the other parts clean.
  • Storage temperature condition: -20 C to 70 C at a relative air humidity of 85%(non-condensing.)
  • Sterilization ifs not necessary, since the parts do not come into direct contact with the patient’s body.
  • Remove the bladder first, and wipe the velcro, bladder, and tubes with a damp cloth. The cuff can be washed with soap and cold water like all the other cuffs, but you must rinse the cuffs with clear water afterward and let them air dry.
Sphygmomanometer Recalibration Tip Sheet

Much like a bathroom scale, your blood pressure cuff gauge often needs to be recalibrated back to zero. If you notice that your BP Set is not giving accurate readings or if the needle is misaligned in its neutral state, it may be time to reset your gauge.

Follow the steps below to ensure your blood pressure cuff calibration of sphygmomanometer is always accurate:

Step one:

Remove the rubber hose from the gauge.

Step two:

Locate the two flat spots on the threaded area where the gauge connects to the hose.

With an adjustable wrench, firmly clasp the flat spots and gently turn. Be careful not to strip the threaded portion of the gauge. As you turn the wrench, the needle should move.

Step three:

Align the needle to sit within the rectangle at the bottom of the gauge. The rectangle is the “zero zone”. If your needle is within this zone, you should receive an accurate reading. Ideally, it should be in the middle of the rectangle (see image above).

Step four:

Reconnect your gauge to the rest of the unit and rest it.

If you are still not getting an accurate reading, check to be sure the needle is aligned properly and that you are using the unit correctly.

If you believe your unit is damaged, be sure you have filled in and mailed your warranty card to AMG Medical Inc. Your product is guaranteed by the company to be free from defects in material and workmanship; however, you must have followed the warranty instructions you received with your unit at the time of purchase.

Shipping Information

Weight 0.34 kg
Dimensions 20 × 10 × 7 cm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.